Home > Products > Excavator Main Control Valve >
Excavator Kubota KX183 KX185-3 Main Control Valve – Part Nos. RD819-61137

Excavator Kubota KX183 KX185-3 Main Control Valve – Part Nos. RD819-61137

Main Control Valve For Kubota KX183

RD819-61137 main control valve

RD819-61137

Place of Origin:

China

Brand Name:

CAVOYD

Model Number:

kx183 kx185-3

Chat Now
Request A Quote
Product Details
Warranty:
6Months
Condition:
New / Rebuilt
Product Name:
Travel Motor Assembly / Final Drive Assembly
Place Of Origin:
China
Supply Ability:
300 Sets / Month
Part No:
RD819-61137
Delivery Time:
3-8 Working Days
Payment Terms:
Western Union, T/T
MOQ:
1 Set
Packaging Details:
Wooden Case / Carton With Foam Protection, Or As Required
Transportation Method:
DHL, UPS, FedEx, Sea Freight
Highlight:

Main Control Valve For Kubota KX183

,

RD819-61137 main control valve

,

RD819-61137

Payment & Shipping Terms
Minimum Order Quantity
1 set
Price
Negotiable
Packaging Details
Dimension: L65×W40×H35 cm
Delivery Time
3-8 days
Payment Terms
T/T
Supply Ability
300pcs/day
Product Description
Installation & Verification Guidelines
  • Verify the part number and confirm main control valve assembly compatibility, including boom, arm, bucket, travel, and swing spools, as well as relief valves and holding valves.
  • New or remanufactured valves must include hydraulic bench test reports covering pressure, flow, and internal leakage for each section.
  • For remanufactured valves, confirm whether spools are honed, repaired, or new. Replace all O-rings.
  • Inspect the valve block for casting cracks and sand holes upon arrival. Seal oil ports to prevent dirt and contaminants from entering the valve cavity.
  • Secure the valve firmly during transportation to avoid impact damage to the valve block, port threads, and precision spools.
  • Clean the hydraulic tank and pipelines before installation, replace all hydraulic filters, and fully bleed air from the hydraulic system.
  • After installation, test compound movements, cylinder drift, and system relief pressure. Check for jerky operation, abnormal noise, and oil seepage.

Common Faults & Symptoms
Spool and Valve Bore Wear — Large Internal Leakage

Symptoms: Weak digging power; performance worsens when hot; boom/arm cylinder sinks.

Cause: Dirty hydraulic oil scratches the spool and valve bore.

Spool Stuck — Slow or Jerky Movement

Symptoms: Slow boom, arm, bucket, and swing action; poor compound operation.

Cause: Oil contamination, oil sludge, damaged return spring.

Relief Valve and Pressure Compensator Failure — Insufficient System Pressure

Symptoms: Low working pressure, pressure fluctuation, whistling noise.

Cause: Worn valve core, spring fatigue, clogged damping hole.

O-ring Damage — External Oil Leakage

Symptoms: Oil seepage between valve slices and end covers.

Cause: Aged sealing rings, loose bolts, air suction causing cavitation.

Holding Valve Seal Failure — Cylinder Drift

Symptoms: Boom and arm sink slowly, worse under heavy load.

Cause: Contamination or wear on the holding valve sealing surface.

Valve Block Cracking (Rare but Serious)

Symptoms: Sudden heavy oil leakage, unable to build hydraulic pressure.

Cause: Long-term pressure impact, uneven bolt tightening torque, casting defects.


Product Images
Kubota KX183 KX185-3 main control valve assembly showing hydraulic spool sections, relief valves, and port connections

Send your inquiry directly to us

Privacy Policy China Good Quality Construction Hydraulic Pump Supplier. Copyright © 2009-2026 Guangzhou Kawo Construction Machinery Co.,Ltd. . All Rights Reserved.